Pro Map

Boost up to 1.5 bar. Full remap. Every major table touched.

The Pro Map is a comprehensive engine remap covering every primary table in the Bosch MEG 1.1 ECU. This is not a single-parameter adjustment — it is a complete recalibration of the engine management system.

Boost pressure reaches 1.5 bar with a fully revised boost control strategy. The overboost map has been rewritten to manage transient pressure spikes effectively. Lambda targets are optimised across all load and RPM zones for maximum power and combustion stability. Ignition timing has been recalibrated to extract the maximum safe advance at every operating point.

What changes:

• Peak boost pressure up to 1.5 bar
• Completely revised boost control and overboost map
• Full lambda map rework for optimal air-fuel ratio across all loads
• Ignition timing recalibrated throughout the load/RPM map
• All primary ECU tables revised

Requirements:

• Clutch in excellent condition strongly recommended
• Standard intake and exhaust in good working order
• No fault codes present before flashing

Best for: Experienced drivers, track-prepared cars, owners who want the maximum from a standard hardware setup.